Navico cable guide: Simrad, Lowrance and B&G
Navico cable guide: Simrad, Lowrance and B&G
Navico makes Simrad, Lowrance and B&G. The three brands share some video cables, but not all of them. Use this page to find the right cable, then open the brand page for your exact model.
Every BoatEye360 night vision camera has both an HDMI output (digital 1080p) and an RCA analog output in the box, so you just use the one your Navico display accepts. HDMI gives the sharpest picture.
Adapter cables and part numbers
000-00129-001
Navico Video IN / NMEA 0183 cable
Two RCA video inputs.
Fits: Simrad NSS evo2/evo3/evo3S, NSE, original NSS. B&G Zeus2, Zeus3, Zeus3S.
000-11010-001
Lowrance HDS video adapter cable
One RCA video input. Fits between the power socket and power cable.
Fits: Lowrance HDS Gen2 Touch (9/12), Gen3, Carbon, Live, Pro.
Every BoatEye360 camera comes with an HDMI cable, an RCA analog cable and an RCA-to-BNC adapter at no extra cost, so you don't need to buy any of them. You only need an extra cable if one is listed above for your model.
Navico models with no video input
- Simrad NSX, GO and Cruise
- B&G Vulcan and Zeus S
- Lowrance Elite, HOOK and Eagle
Install tips
- Match the cable to your exact model and generation, not just the brand.
- Don't use 000-00129-001 on a Lowrance HDS. HDS needs 000-11010-001.
- HDMI OUT ports can't take a camera. Look for HDMI IN.
Not sure about your model?
Text us your exact Navico model and we'll tell you which cable to use.
Last updated:
Taken from manufacturer manuals and spec sheets, October 2026. Manufacturers change hardware and accessories, so check your model's manual or contact us before ordering. All trademarks belong to their owners. See all brands.